CPCCWHS1001 - Prepare to work safely in the construction industry (NSW)
From $165 per person
White Card Course. Must have 100 points of ID to start course.Venue:
Combined Safety Solutions
108 Albatross Road
South Nowra, New South Wales, 2541
0413 589 467
BOOKINGS
A construction worker must have completed general construction induction training (commonly known as the “White Card”) before being permitted to commence work on a construction site. This is a mandatory requirement across Australia.
If you have never worked in the construction industry before or you have lost your White Card; then this is the course for you.
This course will help introduce you to or serve as a reminder of the current health and safety legislative requirements, personal awareness, and the basic principles of risk management for working in the construction industry in order to work safely and prevent injury or harm to self and others.
It covers identifying and orally reporting common construction hazards, understanding basic risk control measures, and identifying procedures for responding to potential incidents and emergencies. It also covers correctly selecting and fitting common personal protective equipment (PPE) used for construction work.
If you have never worked in the construction industry before or you have lost your White Card; then this is the course for you.
This course will help introduce you to or serve as a reminder of the current health and safety legislative requirements, personal awareness, and the basic principles of risk management for working in the construction industry in order to work safely and prevent injury or harm to self and others.
It covers identifying and orally reporting common construction hazards, understanding basic risk control measures, and identifying procedures for responding to potential incidents and emergencies. It also covers correctly selecting and fitting common personal protective equipment (PPE) used for construction work.
Units Delivered
The following units will be included in your certificate:
CPCCWHS1001 - Prepare to work safely in the construction industry
CPCCWHS1001 - Prepare to work safely in the construction industry
Course Delivery
This course can be delivered/assessed in the workplace or at facility organised by the training provider.
Course Durations
Course durations can vary for multiple reasons, so the durations below are the minimum possible amount.
Blended Face to Face contact time of at least 7 Hours
Blended Face to Face contact time of at least 7 Hours
Entry Requirements
An individual undertaking this course with Allens Training Pty Ltd will need to demonstrate the following to be eligible for entry:
Proof of age - must be 14 years or over (parent guardian consent required if under 18).
Valid working email address.
Points of current and valid identification (including Photographic ID). Student will be provided with an Evidence of Identification Checklist (EOI) to complete on enrolment.
Physical capacity to demonstrate the correct donning and removing of PPE for assessment.
Pre-course study: Students may be required to undertake online pre-course work prior to attending the face to face session depending on the course delivery mode.
Online study: Students must have access to a computer, smartphone, tablet or other electronic device with access to the internet to complete the online/ pre-course studies.
Proof of age - must be 14 years or over (parent guardian consent required if under 18).
Valid working email address.
Points of current and valid identification (including Photographic ID). Student will be provided with an Evidence of Identification Checklist (EOI) to complete on enrolment.
Physical capacity to demonstrate the correct donning and removing of PPE for assessment.
Pre-course study: Students may be required to undertake online pre-course work prior to attending the face to face session depending on the course delivery mode.
Online study: Students must have access to a computer, smartphone, tablet or other electronic device with access to the internet to complete the online/ pre-course studies.
Assessment Requirements
Individuals undertaking this course will be expected to complete both written and practical assessment tasks.
Certificate Renewal Requirements
This certificate does not require renewal
Learner Rights, Responsibilities & Support
Please note that enrolment to this course is made with Allens Training Pty Ltd RTO 90909. Please refer to the student handbook located on the RTO website allenstraining.com.au (https://allenstraining.com.au/students/student-handbook) for all details relating to rights and responsibilities including complaints and appeals.
Assessment Activities
Assessment of this unit consists of three assessment tasks:
Answering a series of multiple choice and short answer written questions.
Answering a series of short answer oral questions.
Observation of learners demonstrating the correct fitting of the following Personal Protective Equipment (PPE):
eye protection
hearing protection
hard hat
high visibility retro reflective vest
dust mask.
Answering a series of multiple choice and short answer written questions.
Answering a series of short answer oral questions.
Observation of learners demonstrating the correct fitting of the following Personal Protective Equipment (PPE):
eye protection
hearing protection
hard hat
high visibility retro reflective vest
dust mask.
Upcoming Public Courses: CPCCWHS1001 - Prepare to work safely in the construction industry (NSW)
Combined Safety Training delivers training and assessment on behalf of Allens Training Pty Ltd RTO 90909.
This page displays our upcoming public course calendar for the unit of competency above.
Once you select a course date, you will be redirected to our Training Desk booking platform where you can finalise your booking and make a secure payment. You may return back to our main website by clicking on our logo.