This course set is designed for new and experienced personnel required to work in confined spaces and work safely at heights at an operational level typically in the resources and infrastructure industries. Many roles require both confined space and work safely at heights training, including safety, injury prevention and maintenance personnel, engineers, risk managers, mine managers, cable installers and transport personnel.
Participants will learn to distinguish what constitutes a confined space and working at height; key terminology; as well as understand the regulations and legislative requirements governing entering and working in and around confined spaces as well as working safely at heights. Participants will identify hazards, risks and environmental factors as well as implement appropriate control measures; conduct two risk assessments and apply for two confined space entry permits. The course also teaches students to interpret and apply risk assessment documentation, technical and safety information as well as understand the strengths and limitations of the fall protection equipment available for working safely at heights.
Students will perform two work safely at heights scenarios using various safety systems. This includes installing equipment checking and correctly fitting, adjusting and anchoring fall protection systems and associated equipment.
Students will demonstrate how to enter, exit and work safely in a confined space according to an issued permit for two scenarios. Participants will also inspect and select appropriate personal protective gear; operate various confined space safety equipment including atmospheric testing/monitoring devices; and conduct routine servicing of all equipment and gear.
Participants will learn to distinguish what constitutes a confined space and working at height; key terminology; as well as understand the regulations and legislative requirements governing entering and working in and around confined spaces as well as working safely at heights. Participants will identify hazards, risks and environmental factors as well as implement appropriate control measures; conduct two risk assessments and apply for two confined space entry permits. The course also teaches students to interpret and apply risk assessment documentation, technical and safety information as well as understand the strengths and limitations of the fall protection equipment available for working safely at heights.
Students will perform two work safely at heights scenarios using various safety systems. This includes installing equipment checking and correctly fitting, adjusting and anchoring fall protection systems and associated equipment.
Students will demonstrate how to enter, exit and work safely in a confined space according to an issued permit for two scenarios. Participants will also inspect and select appropriate personal protective gear; operate various confined space safety equipment including atmospheric testing/monitoring devices; and conduct routine servicing of all equipment and gear.
Units Delivered
The following units will be included in your certificate:
RIIWHS202E - Enter and work in confined spaces
RIIWHS204E - Work safely at heights
RIIWHS202E - Enter and work in confined spaces
RIIWHS204E - Work safely at heights
Course Delivery
This course can be delivered/assessed in the workplace or at facility organised by the training provider.
Course Durations
Course durations can vary for multiple reasons, so the durations below are the minimum possible amount.
Refresher - Face to Face contact time of at least 7 Hours
Face-to-Face - Face to Face contact time of at least 12 Hours
Refresher - Face to Face contact time of at least 7 Hours
Face-to-Face - Face to Face contact time of at least 12 Hours
Entry Requirements
An individual undertaking this course with Allens Training Pty Ltd will need to demonstrate the following to be eligible for entry:
Psychological* and physical capability to be able to meet the demands of the practical demonstrations for this course, such as the undertaking of the requirements to safely enter, work in and exit a confined space wearing appropriate PPE. This may involve crawling and climbing up, down, through or under structures or confined spaces, being temporarily suspended, wearing harnesses and other relevant PPE, dragging and lifting in confined and restricted environments in dark, low light or smoke-filled areas. Participants will need sufficient physical ability to lift up to 15kg from ground to overhead and access heights above 2m.
Protective slip resistant footwear/safety shoes and comfortable/practical clothing must be provided by the student and worn during the practical sessions and assessment
Language, literacy and numeracy requirements - students must be able to read and correctly interpret required documentation relevant to the confined space entry, speak clearly and unambiguously in English, explain, describe and verify sometimes complex needs and issues and understand the permit requirements. Writing is required to the level of completing workplace forms and producing any required reports. Numeracy is required to the level of being able to correctly differentiate between high and low pressures and temperatures, voltages or masses and interpret gas test/monitoring results.
*Safe Work Australia notes “Working in a confined space may impose physiological and psychological demands over and above those encountered in a normal working environment. Consideration should be given to a worker’s:
physical ability;
ability to work in a restrictive space (for example claustrophobia) and ability to wear the PPE required to do the work (for example respirators).”
Code of Practice - Confined Spaces, December 2011 p 14.
Psychological* and physical capability to be able to meet the demands of the practical demonstrations for this course, such as the undertaking of the requirements to safely enter, work in and exit a confined space wearing appropriate PPE. This may involve crawling and climbing up, down, through or under structures or confined spaces, being temporarily suspended, wearing harnesses and other relevant PPE, dragging and lifting in confined and restricted environments in dark, low light or smoke-filled areas. Participants will need sufficient physical ability to lift up to 15kg from ground to overhead and access heights above 2m.
Protective slip resistant footwear/safety shoes and comfortable/practical clothing must be provided by the student and worn during the practical sessions and assessment
Language, literacy and numeracy requirements - students must be able to read and correctly interpret required documentation relevant to the confined space entry, speak clearly and unambiguously in English, explain, describe and verify sometimes complex needs and issues and understand the permit requirements. Writing is required to the level of completing workplace forms and producing any required reports. Numeracy is required to the level of being able to correctly differentiate between high and low pressures and temperatures, voltages or masses and interpret gas test/monitoring results.
*Safe Work Australia notes “Working in a confined space may impose physiological and psychological demands over and above those encountered in a normal working environment. Consideration should be given to a worker’s:
physical ability;
ability to work in a restrictive space (for example claustrophobia) and ability to wear the PPE required to do the work (for example respirators).”
Code of Practice - Confined Spaces, December 2011 p 14.
Assessment Requirements
Individuals undertaking this course will be expected to complete both written and practical assessment tasks.
Certificate Renewal Requirements
This certificate does not require renewal
Learner Rights, Responsibilities & Support
Please note that enrolment to this course is made with Allens Training Pty Ltd RTO 90909. Please refer to the student handbook located on the RTO website allenstraining.com.au (https://allenstraining.com.au/students/student-handbook) for all details relating to rights and responsibilities including complaints and appeals.
Assessment Activities
Performance tasks:
Horizontal entry into a confined space
Use atmospheric monitoring devices prior to entering the confined space
Work at height on a brittle surface
Work at height on a flat surface into a confined space
Documentation:
Completion of two site-based Risk Assessment (JSEA/SWMS) forms and two Confined space entry permits
Interpret a JSEA/SWMS and ensure the control measures are appropriate for the risks identified.
Theory assessment – A written assessment consisting of short-answer and multiple-choice questions. The student must successfully complete all assessment questions.
Horizontal entry into a confined space
Use atmospheric monitoring devices prior to entering the confined space
Work at height on a brittle surface
Work at height on a flat surface into a confined space
Documentation:
Completion of two site-based Risk Assessment (JSEA/SWMS) forms and two Confined space entry permits
Interpret a JSEA/SWMS and ensure the control measures are appropriate for the risks identified.
Theory assessment – A written assessment consisting of short-answer and multiple-choice questions. The student must successfully complete all assessment questions.
Upcoming Public Courses: Course Set - RIIWHS202E & RIIWHS204E
Combined Safety Training delivers training and assessment on behalf of Allens Training Pty Ltd RTO 90909.
This page displays our upcoming public course calendar for the unit of competency above.
Once you select a course date, you will be redirected to our Training Desk booking platform where you can finalise your booking and make a secure payment. You may return back to our main website by clicking on our logo.